BetSelection.cc

Please login or register.

Topic: [DRAFT] Triggers and Filters  (Read 3405 times)

0 Members and 1 Guest are viewing this topic.

Offline VLS

  • Tech guy
  • Administrator
  • *****
  • Posts: 2885
  • Gender: Male
  • Assistant Administrator
    • View Profile
[DRAFT] Triggers and Filters
« on: May 22, 2014, 11:36:42 AM »
  • ReplyReply
  • Triggers and Filters

    Everybody focuses on triggers, yet there is a complementary element of the equation which can be as much valuable -if not more- being much-neglected: FILTERS.

    Triggers add numbers to the selection pool.

    Filters remove numbers from the selection pool.

    A proper filter can be the very fine-tuning piece which changes a method into a personal holy grail.

    In order to talk about filters we necessarily need to address accompanying triggers; they are complementary:

    Example:

    - Trigger: add neighbors of a repeater.
    - Filter: remove no-shows within last cycle and a half.

    With this combination you finish with:

    "Neighbors of a repeater in current cycle excluding sleepers".

    Since you avoid sleepers automatically with the filter, it can save units which are redirected for a different purpose in the attack; opening the possibility of making a difference in your personal bottom line when running the system.

    Filters can also "cascade" for a single trigger; for instance, in this example using same trigger as above:

    - Trigger: add neighbors of a repeater.- Filter: remove no-shows within last cycle and a half.
    - Filter #2: remove numbers which didn't form a zone within last two cycles.

    With this combination you finish with: "Neighbors of a repeater in current cycle excluding sleepers and those not previously belonging to an active zone".

    Remember zones are the result of the "clumping principle" in the game, so you are effectively aiming for a number which not only isn't a sleeper, but already "clumped" in a hot zone of the wheel, located right next to an active repeater.

    Multiple triggers and filters can combine. Several triggers act independently to add numbers to the selection pool, then they are sifted by the filters in place before further proceeding. Example:

    - Trigger A: add neighbors of a repeater.
    - Trigger B: add numbers at +1 space of a repeater.

    - Filter: remove no-shows within last cycle and a half.
    - Filter #2: remove numbers which didn't form a zone within last two cycles.

    ...You can also "pre-filter" triggers to later "pipe" those resulting numbers through further processing, treating them as "packs".




    As programmers, we see the bet selection process as a series of algorithms exercising over a pool of unselected and selected numbers as well. Processing doesn't end after merely selecting the numbers with triggers.

    This may not be obvious for most people, yet as programmers we can see triggers and filters most clearly as separate entities since they are entirely individual coded procedures working on the current pool of numbers to a separate tune & dance each, building a resulting new rhythm of their own.

    Email: betselectiongmail.com
    -- Victor


    Offline stringbeanpc

    • Rising Member
    • **
    • Posts: 39
    • Gender: Male
      • View Profile
    Re: [Draft] Triggers and Filters
    « Reply #1 on: May 24, 2014, 07:18:36 PM »
  • ReplyReply
  • Victor,
    Great suggestions, your posts always give me new aspects of the game to examine.




    Offline VLS

    • Tech guy
    • Administrator
    • *****
    • Posts: 2885
    • Gender: Male
    • Assistant Administrator
      • View Profile
    Re: Triggers and Filters
    « Reply #2 on: February 26, 2016, 09:35:12 PM »
  • ReplyReply
  • Everybody focuses on triggers, yet there is a complementary element of the equation which can be as much valuable -if not more- being much-neglected: FILTERS.

    Triggers add numbers to the selection pool.

    Filters remove numbers from the selection pool.

    A proper filter can be the very fine-tuning piece which changes a method into a personal holy grail.

    Here is an interesting though: filters being a form of "triggers" on its own; now that's "meta" :)

    Email: betselectiongmail.com
    -- Victor

    Offline VLS

    • Tech guy
    • Administrator
    • *****
    • Posts: 2885
    • Gender: Male
    • Assistant Administrator
      • View Profile
    Re: [DRAFT] Triggers and Filters
    « Reply #3 on: February 09, 2018, 10:36:37 PM »
  • ReplyReply
  • Filtering sleepers can make a difference to certain methods where the units saved are redirected to later steps in the progression/attack.

    ...I'm currently on the fence regarding what's officially a sleeper, yet at least those not showing after a cycle and a half can be labeled as such (in my view).

    Email: betselectiongmail.com
    -- Victor

    Offline AsymBacGuy

    • Hero Member
    • *****
    • Posts: 645
      • View Profile
    Re: [DRAFT] Triggers and Filters
    « Reply #4 on: February 10, 2018, 12:06:28 AM »
  • ReplyReply
  • Nice thoughts Vic.

    I meekly suggest to consider the outcomes of each wheel separately as there's no general plan capable to get the best of it for every existing roulette.

    as.

     
     

    Winners are simply willing to do what losers won't